Carepod One Plus: Quick Setup Guide

Getting started with your new Carepod? From setup basics to tips on ideal placement, water type, and troubleshooting, we’ll walk you through everything you need to know to make the most of your Carepod. Let’s get you set up for fresh, hydrated air.
How do I set up my Carepod One Plus?
-
Take your new Carepod out of the box.
-
Remove the tape securing the lid and open.
-
Attach the wand to the control panel lid.
-
Set your Carepod on top of a table, stool or elevated surface that’s at least two feet off the floor.
-
Fill the tank with filtered or distilled water up to the MAX line – make sure not the fill above the line.
-
Gently pull the white wand down, toward the direction of the tank so it can oscillate properly.
-
Close the lid.
-
Connect the power cord.
For a demo on how to set up a Carepod stainless steel humidifier, watch the video here.
Where should I place my Carepod One Plus?
Carepod One Plus is designed for rooms up to 500 square feet, so make sure your space isn’t too big or too small for optimal results.
Tips for ideal performance
-
Place your Carepod on a nightstand, table or stool.
-
Make sure the flat surface is at least two feet above the floor. This height allows for ideal mist circulation.
-
Lastly, position your Carepod where it’s easy to access.
Don’t forget to keep in mind
-
Avoid aiming the mist close to wooden furniture or sensitive materials, like artwork or electronics.
-
Setting your Carepod up in a bedroom? If aiming mist towards the bed, place it at least three feet away. Or aim away towards the room for best circulation + comfort.
-
Lastly, take care to avoid extreme temperatures — don’t set your Carepod humidifier near direct sunlight, heaters, or stoves.
For more tips on choosing the perfect spot for your Carepod, click here.
What do the buttons on my Carepod One Plus do?
On the top of your Carepod One Plus, there is a main panel with three buttons.
From left to right: Mist/Mood Light, Power, Timer/Dark Mode
Mist
The Mist button allows you to change the intensity of mist. Tap the button to choose between low, medium and high.
Mood Light
The Mood Light button allows you to turn on the light and select a color. To turn on the Mood Light, tap and hold the button for about 2 seconds.
To choose a color, continue holding the button down to cycle through seven color shades.
Release the button to set your desired mood light color.
To turn the Mood Light off, tap and hold the button for about 2 seconds.
To learn how to turn on the Mood Light, watch the full video here.
Power
The Power button allows you to turn on and off your humidifier. Press this once to turn your Carepod One Plus on. If the water tank is full, it will initiate hydration with Level 3 Mist, as indicated by the white LED light.
To stop humidification, press the Power button again. Your Carepod will automatically shut off after 30 seconds. Please note that the Power LED light will turn red when it detects a low water level in your humidifier.
Timer
The Timer button lets you set a run time for the humidifier. Tap the button to cycle to the next level of duration.
Level 1: Four hours
Level 2: Six hours
Level 3: Eight hours
The LED indicator lights will change as time passes to indicate how much time is remaining. If you don’t set the Timer, the humidifier will continue running until water is low. It will automatically turn off when only 2 inches of water remain to protect the self-floating oscillator wand.
Dark Mode
The Dark Mode button will turn off all lights.
To turn on Dark Mode, tap and hold the button for about 2 seconds. The button lights and Mood Light band will turn off.
To exit Dark Mode, simply tap any button on the humidifier’s control panel.
To learn how to use Dark Mode, watch the full video here.
What type of water should I use in my Carepod One Plus?
For the best results, use distilled or filtered water in your Carepod humidifier.
Tap water often contains minerals and impurities that can leave residue and affect hydration quality. Using regular tap water in your humidifier can also result in device issues over time.
Warning: Do not fill above the MAX line of your stainless steel water tank. This can lead to issues with the oscillator wand.
To learn more, watch the video here.
How do I clean my Carepod One Plus?
There are two ways to clean your humidifier: either through gentle handwashing or sterilization. We recommend cleaning every 1-2 weeks.
Handwashing or Dishwasher
-
Remove the stainless steel water tank, inner lid cover, and white wand.
-
Handwash the stainless steel parts with dish soap and water OR add only the stainless steel parts to dishwasher.
-
Gently handwash the white wand with a soft sponge. Wash only the bottom half. Avoid getting the electric plug wet.
-
Fully dry each part before attaching back into your Carepod.
Sterilization
-
Remove the stainless steel water tank, inner lid cover, and white wand.
-
Fill the tank with water.
-
Place the tank on the stove. Add the inner lid cover.
-
Set to boil at medium heat.
-
Boil for 1-2 minutes.
-
Let the tank cool down, then safely pour the water into the sink.
-
Wipe and dry each part before attaching back into your Carepod.
To learn more, visit our full cleaning guide with video.
I'm running into issues. What should I do?
There are a few ways to get help with your Carepod humidifier:
-
View the Carepod One Plus manual for more detailed information
-
Explore our Support page or FAQ Blog for answers and resources
-
Visit our Self-Troubleshooting Guide for simple steps to resolve common issues